The WAVEFRONT Technology of the Hartmann Sensor enables accurate data detection compared to the existing 131 pin hole of the lens meter.
Measurement error has been minimized through optimizing algorithms and optical points could be analyzed accurately using high - resolution camera
ULM-900 could accurately measure the far vision and near vision by detecting the position of the lens in real time.
7 inch Wide LCD allows to minimize eye fatigue and support lens separation mode and screen PD measurement to ensure user convenience.
UV & Bluelight blocking ratio of each could be measured to be shown on monitor at a glance.
| Measurement Range | |
| Spherical Power(SPH) | -25.00 ~ +25.00D (VD 12mm) Increments: 0.01/0.06/0.12/0.25D |
| Cylinderical Power(CYL) | 0.00 ~ ±10.00D Increments: 0.01/0.06/0.12/0.25D Form : -/+/+- |
| Axis | 1 ~ 180˚ Increments: 1˚ |
| Addition Power | 0.00 ~ +10.00D Increments: 0.01/0.06/0.12/0.25D |
| Prism Power | 0.00 ~ 10.00∆ Increments: 0.01/0.06/0.12/0.25∆ Form : OFF/X-Y/P-B |
| UV, Bluelight | 0 ~ 100% , 0 ~ 100% |
| Applicable lenses | |
| Applicable Lens type | Single lens / double focal lens / Three focal lens / progressive multifocal lens |
| Hard contact lens / Soft contact lens (a special accessory is required respectively) | |
| Lens diameter | 16 ~ 100mm |
| Note | |
| Data Out | RS-232C, USB |
| Internal Printer | Thermal printer |
| Display | 7.0 inch Full Color LCD Monitor, Touch Panel |
| Operation environment | Temperature : +10℃ ~ +40℃ Humidity : 30% ~ 90% RH Atmospheric pressure range : 70 kPa ~ 106 kPa Shock (without packaging) : 10g / 6ms |
| Storage and environmental condition | Temperature : -40℃ ~ +70℃ Humidity : 10% ~ 95% RH Atmospheric pressure range : 50 kPa ~ 106 kPa Shock : 30g / 6ms Permanent shock : 10g / 6ms Oscillate(sine curve) : 10Hz ~ 500Hz, 0.5g |
| Power supply | AC100V ~ 240V. 50/60Hz |
| Power consumption | 45 ~ 65VA |
| Dimension | 175mm(W) x 255.5mm(D) x 478mm(H) |
| Weight | 5.25kg |
Reunión virtual con el Dr. Julian Triviño (Colombia)
