Learning Center - Welch Allyn 71000-c 3.5v nickel-cadmium convertible rechargeable handle.110V -220V

Learning Center Welch Allyn 71000-c 3.5v nickel-cadmium convertible rechargeable handle.110V -220V

As part of the training process Mercoframes offers to customers and distributors, today we speak about: Welch Allyn 71000-c 3.5v nickel-cadmium convertible rechargeable handle.110V -220V Thank you for follow us. To order: sales@mercoframes.com 1-312-962-7227 Alex Gutman |CEO Mercoframes

• Rechargeable nickel-cadmium battery included • Smooth, nonabrasive knurled finish ensures a no-slip grip • Chrome-plated brass construction for durability and reliable long-life • Rechargeable and can also be converted for use with standard C-cell batteries (model 71000-C only) • Recharges in the Welch Allyn desk charger and numerous stand consoles and well-chargers (model 71670) Before using this product, please read the warnings and instructions. Maintenance Like any other piece of electro-medical equipment, perform periodic electrical inspections by qualified personnel. Welch Allyn recommends that this equipment is inspected at least every six months, more often if used under adverse conditions. Instructions for Recycling Nickel-Cadmium Batteries Welch Allyn now employs the services of an agency which can disassemble and recycle all components of nickel-cadmium batteries so that nothing gets landfilled or incinerated. Should you wish to dispose of your expended Welch Allyn rechargeable battery via recycling (in the U.S. and Canada only), For locations outside the U.S. and Canada, consult your local recycling authority for correct disposal of batteries. Handles POSSIBLE EXPLOSION HAZARD. Equipment not suitable for use in the presence of a flammable anesthetic. Do not disassemble or modify the battery pack. There are no serviceable parts inside. Do not charge battery pack in any environment where the temperature may exceed 40°C (104°F) or fall below 0°C (32°F). For longest service, remove the handle and AC Charging Module from outlet when charging is complete. Do not leave AC Charging Module connected to power outlet without a handle attached. Do not sterilize the 710 Series Power Handle FOR BEST PERFORMANCE: Do not expose battery pack to storage temperatures above 50°C (122°F) or below -20°C (-4°F). Do not discharge battery pack if the ambient temperature is above 60°C (140°F) or below -20°C (-4°F). Nickel Cadmium Handle The 710 is a universal handle which accepts all Welch Allyn 3.5v instrument heads. Its adjustable rheostat control allows optimal intensity and battery life. The chrome-plated brass handles and metal head connection provide durable, long life construction and the smooth, non-abrasive knurled finish insures a no-slip grip. The 710 series also have a built in charger for easy, overnight charging of the long-lasting rechargeable nickel Cadmium batteries. As an accessory, the converter ring is available in the 71000-C handle, which enables insertion of off-the-shelf C-cell batteries in place of the rechargeable batteries for continued operation without the need to wait for recharging. Specifications: Dimensions: 5.5” Long x 1.50” Diameter (max) Weight: 10 oz. (including battery) Input Voltage: 120V 60Hz 0.17A Before using, follow these instructions: 1. fully charge battery (16 hours) 2. run battery completely down 3. fully recharge (16 hours) 4. run battery completely down 5. fully recharge (16 hours) 6. ready for use Special Notes • Slight heating of handles is normal during recharge cycle. • Batteries cannot overheat or overcharge. • Batteries will not leak. • Batteries will discharge gradually over a period of about 60 days when stored at room temperature (70°F). Storage at higher temperatures accelerates the discharge rate. • For rechargeable handles that accommodate -C- or -AA-size batteries — remove batteries from handle if instrument is not in use for an extended period of time. Cleaning Procedure for Handle The cleaning of all Welch Allyn power handles is easily accomplished by wiping the external surface with a damp cloth soaked with a mild detergent and water solution, or solution of 70% isopropyl alcohol and water, or a solution of 10% clorox and water. Do not immerse. Soak the cloth in the solution and wrung out to prevent excess water from entering the assembly. Battery Charger Instructions for 110 V and 220 V ( adaptor required) 1. Plug into a 110-130 V, 50-60 Hz A.C. receptacle for No. 71040. (90-110 V for 71030, 220-250 V for 71032, 71034, and 71036). 2. Connect the charging plug to charger socket on instrument or charging stand. 3. Support the instrument during charging. Do not suspend the instrument by its charging cord. 4. Batteries do not overcharge. A completely discharged battery is fully charged overnight. 5. Use the charger with either 2.5 V or 3.5 V rechargeable instruments. 6. Do not use diagnostic instruments while charging. Guarantee Warranty does not apply to the use of the 72200 or 72300

Inquiry about

Accept Terms and Conditions
Welch Allyn 71000-c 3.5v nickel-cadmium convertible rechargeable handle.110V -220V
Welch Allyn 71000-c 3.5v nickel-cadmium convertible rechargeable handle.110V -220V

You Recently Viewed Items

Events / Shows View All

AAO 2023
AAO 2023

AAO 2023

Bascom Palmer 2023
Bascom Palmer 2023

Bascom Palmer 2023

Reunión virtual con el Dr. Julian Triviño (Colombia)
Reunión virtual con el Dr. Julian Triviño (Colombia)

Reunión virtual con el Dr. Julian Triviño (Colombia)

AAO 2021
AAO 2021

 Friday, Nov. 12 - Monday, Nov. 15  Ernest N. Morial Convention CenterNew Orleans, LA.

5555 NW 74 AVE.
MIAMI. FL. 33166
P: 305-882-0120
F: 305-882-0140
sales@mercoframes.net
Skype mercoframesonline
Skype sales3mercoframes
Skype helpmercoframes
WhatsApp +1 305-882-0120
Hangouts ale@mercoframes.net